Skip to main content

Collagraphs

One of the classes I am teaching at the moment is collagraph printmaking. As the name implies, you make a collage of materials on a flat substrate such as matboard, seal the back and the front, then ink and wipe it like an intaglio plate before printing. Here is one of the collagraphs I have made this year:

The texture along the top is created by ripping away the first layers of the matboard and exposing some of the rougher fibres below the smooth surface. The crane shape comes from cutting precise lines with an x-acto knife and then digging away inside the lines. The brown shape below the crane=a piece of thin textured fabric glued onto the matboard. The factory=pieces of the torn mat board cut into regular shapes and glued back down. Finally, the very darkest areas were created by brushing on carborundum mixed with PVA. When all of that was dry, I sealed the front and the back with acrylic gloss medium. Inking=prussian blue and sepia, wiped with tarlatan to create a middle tone of bluish-green.

What's nice about collagraph printmaking is that you can make a plate with a variety of textures and marks that is similar to an aquatinted copper plate etching, but produced at a fraction of the cost. And my students at the Art Center Highland Park are making similar discoveries:

These were created from pieces of birch bark that someone brought along to the class.

The following print was made by cutting and tearing the matboard, plus a little bit of carborundum:

For an example of how you can use collagraphy to make epic-scale images, look at the work of Cuban artist Belkis Ayon:

Copyright: Kemper Art Museum.

Popular posts from this blog

Restoring my Printing Press

I've just finished restoring and assembling my large etching press -- a six week process involving lots of rust removal, scrubbing with steel wool, and repainting. Here is a photo of the same kind of press from the Chicago Printmakers Collaborative: And here is a short YouTube video of me testing the press, making sure the motor still works after nearly seven years of lying in storage:

Brancusi in Plastic

Artist Mary Ellen Croteau is showing these columns made from recycled plastic cartons and lids in the window of the Columbia College bookstore on Michigan Avenue. They are a playful homage to Brancusi's "Endless Columns", with a serious environmental message for our times: Image copyright Inhabitat.com and Mary Ellen Croteau Mary Ellen also runs a wonderful experimental art gallery in a window space in west Chicago, called Art on Armitage . I will be exhibiting a mixed media piece there during August 2012.

How to etch a linoleum block

Linoleum as a material for printmaking has been used for nearly a hundred years now. Normally, you cut an image out using special gouges similar to woodcut tools, cutting away the lino around the image you want to print. This is called relief printmaking, because if you look at the block from the side, the material that remains stands up in relief from the backing material. You then roll ink with a brayer over the surface of the block, place paper over it, and either print by hand or run it through a press. You can do complex things this way (for example, reduction linocuts), but the beauty of the process is that it is quick, simple, and direct. Incised lino block, from me.redith.com Etched lino block, from Steve Edwards A few years ago, I saw some prints that were classified as coming from etched linoleum blocks, and I loved the textures I saw in them. In the last few months, I've been trying to use this technique in my own studio, learning about it as one does these d