Skip to main content

A Student Wrote to Me ...

... and told me something very gratifying to me personally. He said that he took one of the stories that he started writing in the Story in Fiction and Film class that I taught this semester, and turned it into the following fake movie trailer. He shot it last weekend with the help of friends and peers (he's a Film and Video major). His name is Noah Kloor - remember his name when the 2015 Oscars (or thereabouts) come along.


 Subscribe to Praeterita in a reader

Comments

Popular posts from this blog

Brancusi in Plastic

Artist Mary Ellen Croteau is showing these columns made from recycled plastic cartons and lids in the window of the Columbia College bookstore on Michigan Avenue. They are a playful homage to Brancusi's "Endless Columns", with a serious environmental message for our times:

Mary Ellen also runs a wonderful experimental art gallery in a window space in west Chicago, called Art on Armitage. I will be exhibiting a mixed media piece there during August 2012.

How to etch a linoleum block

Linoleum as a material for printmaking has been used for nearly a hundred years now. Normally, you cut an image out using special gouges similar to woodcut tools, cutting away the lino around the image you want to print. This is called relief printmaking, because if you look at the block from the side, the material that remains stands up in relief from the backing material. You then roll ink with a brayer over the surface of the block, place paper over it, and either print by hand or run it through a press. You can do complex things this way (for example, reduction linocuts), but the beauty of the process is that it is quick, simple, and direct.


A few years ago, I saw some prints that were classified as coming from etched linoleum blocks, and I loved the textures I saw in them. In the last few months, I've been trying to use this technique in my own studio, learning about it as one does these days from websites and YouTube videos. I've also had email exchanges with several pr…

Restoring my Printing Press

I've just finished restoring and assembling my large etching press -- a six week process involving lots of rust removal, scrubbing with steel wool, and repainting. Here is a photo of the same kind of press from the Chicago Printmakers Collaborative:


And here is a short YouTube video of me testing the press, making sure the motor still works after nearly seven years of lying in storage: